The ADF does not support Color scan mode. Select a b&w scan mode.

Scanning canceled by user.

No response from the driver.  You may have a SCSI ID conflict.  Please change the SCSI ID on the scanner and try again.  (Also see the troubleshooting section of the manual.)

Status Code Error.

Undefined status parameters.

Control Code Error. Please remove the ScanMaker.Settings file and restart ScanMaker Plug-In. ($7FEF)

Please remove the ScanMaker.Settings file and restart ScanMaker Plug-In. ($9104)

No paper in your scanner.

Five NAKs occurred.  Please check the scanner connection and the ready light.

Unexpected data received. Please remove the ScanMaker.Settings file and restart ScanMaker Plug-In. ($9102)

Scanner timeout error.  Please check the scanner connection and the ready light.

Scanner response error. Please remove the ScanMaker.Settings file and restart ScanMaker Plug-In. ($90XX)

User-function error. Please remove the ScanMaker.Settings file and restart ScanMaker Plug-In. ($8003)

Buffer overflow error. Please remove the ScanMaker.Settings file and restart ScanMaker Plug-In. ($8002)

Error in settings.  Please remove the ScanMaker.Settings file and restart the ScanMaker Plug-In. ($8001)

Read error, please turn the scanner off and back on.

Tried to remove an open driver, please restart your system.

Driver could not respond to this control call. 

Driver could not perform the requested Read/Write operation. Remove the ScanMaker.Settings file and try again.

Could not find the driver in the resource file.

Wrong Model name.  There may be a SCSI ID conflict.  Please change the SCSI ID on the scanner and restart the ScanMaker Plug-In.

Buffer error. Please reinstall the ScanMaker Plug-In from your master disk.

Driver ID conflicts ($FFEB)

Driver ID conflicts ($FFEA)

Driver could not be opened.  Please restart your system.

Error communicating with the scanner.  Check the ready light and the lamp.  You may need to change the lamp.

Scanning error. Make sure the Ready light & scanning lamp are on. Contact Microtek if lamp is not shining brightly. If ADF option is selected, make sure there are documents in the ADF and the scan mode is not color.

A SCSI protocol error has occurred.  Please quit the program and make sure that the scanner is on, connected and the correct model name appears in the Model box.  If it is not on, you may need to change the lamp.

System Error: